Grooving with diamond and CBN grooving systems
For grooving and parting off, you have two grooving systems with different grooving widths and depths available from our stock.
Particularly economical due to the double loading with PCD / CVD-D and CBN. Suitable for smooth and interrupted cuts.
Our ECO-Line grooving systems
- Grooving and parting
- Grooving depth up to 25mm
- Grooving with edge grooving insert
- Grooving width 2,00 – 4,00mm
- Grooving with full radius insert
- Grooving width 2,00 – 6,00mm
parting
- Grooving depth up to 25mm
- Parting depth up to 2,0mm
Our MICRO-Line systems
- Grooving and parting
- Grooving depth 3,80mm
- Grooving with edge grooving insert
- Grooving width 1,00 – 2,00mm
- Grooving with full radius insert
- Grooving width 1,00 – 2,00mm
ECO-Line grooving systems
Available in following cutting materials:
Application range:
- Aluminium <10%Si
- Copper / Tungsten Copper
- CFRP / GFRP / Sandwich materials
- Brass
- Graphite
Application range:
- Carbide G-type >12% Co
- Carbide K-type >15% Co
- Ceramic / Glass ceramic
- Aluminium >10%Si
- Quartzglass / Glass
- Titanum (Finishing operations)
- Copper / Tungsten copper
- CFRP / GFRP / Sandwich materials
- Glass / Plexiglass
- Abrassive non-ferrous materials
- Other brittle non-ferrous materials
Application range:
- Hardened steels up to a hardness of 72HRC
- Hardened sintered steel
Application range:
- Hardened tool steel up to a hardness of 72 HRC
- Stellite
- Carbide >20%Co
Application range:
- Cast iron
- Ductile cast iron
MICRO-Line grooving systems
Available in following cutting materials:
Application range:
- Carbide G-type >12% Co
- Carbide K-type >15% Co
- Ceramic / Glass ceramic
- Aluminium >10%Si
- Quartzglass
- Titanum (Finishing operations)
- Copper / Tungsten copper
- CFRP / GFRP / Sandwichmaterialien
- Glass / Plexiglass
- Abrassive non-ferrous materials
- Other brittle non-ferrous materials
Application range:
- Aluminium <10%Si
- Copper / Tungsten copper
- CFRP / GFRP / Sandwich materials
- Brass
- Graphite

Application range:
- Carbide G-type <12%Co
- Carbide K-type >7%Co
- Carbide with Ni Binder
- Ceramic / Glass ceramic
- Quartzglass / Glass
- Other brittle, non-ferrous materials
Application range:
- Hardened steels up to a hardness of 72HRC
- Hardened sintered steel
Application range:
- Hardened tool steel up to 72 HRC
- Stelite
- Carbide >20%Co
Application range:
- Gray cast iron
- Spheroidal graphite cast iron
Contact us!
DTS GmbH
Hans-Geiger-Strasse 11a
D-67661 Kaiserslautern
Customerservice
Business times
Mo. – Fr. 8:00 am – 16.30 pm
Contact
T: +49 (0) 6301 32011-0
F: +49 (0) 6301 32011-90